• 0 Posts
  • 106 Comments
Joined 3 years ago
cake
Cake day: June 30th, 2023

help-circle



  • The guy who got pinned to the ceiling was from the SL-1 accident, and it was due to a poor reactor design which allowed the reactor to go prompt critical by removing only one control rod. Normally the rods were in the down position when the reactor was shut off, but to bring it back online the rods had to be lifted by hand a few inches so they could be attached to the drive cables. Another flaw was that the control rods had a habit of getting stuck, so the leading theory is that the operator accidentally pulled it out too far when trying to get it free. We’ll never know exactly what happened though, since all three operators died in the explosion.














  • It depends on the design of the toilet, and how much water it dumps into the bowl at each flush. Some toilet designs have a tank with a higher capacity than the bowl, so if it gets clogged then it’ll overflow. Pro tip: know where your toilet’s shutoff valve is, it’s usually on the wall just under the tank. If it looks like the toilet is about to overflow, just turn that valve off and you can avoid the mess.