Last week, top ICE officials ordered officers to increase arrests and to get “creative” in their methods, including trying to nab people the officers happen to encounter in what are known as “collateral arrests.” The orders come in the wake of Homeland Security Secretary Kristi Noem and White House deputy chief of staff Stephen Miller setting a quota of 3,000 immigration arrests per day, along with a sharp rise in protests against the crackdown.
In Westbury, the HSI agents didn’t respond to the gathered crowd. After a few minutes, the agents drove away. A commotion erupted down the road, off-camera, and onlookers began rushing toward the corner.
One of the Nissans, carrying two of the HSI agents, had crashed into a black pickup truck that happened to be passing through the intersection. Three eyewitnesses told The Intercept that the agents’ car had sped away. Two of the witnesses believe the Nissan blew a stop sign, causing the crash. (Nassau County police referred questions about the accident to ICE, which did not respond to an inquiry.)
Removed by mod
The ingredients in this cocktail A Molotov cocktail has three main components:
A casing. This is usually made of glass, in order to hold and store the fuel, but shatter upon impact in order to release it. Alcohol bottles are commonly seen in media, but Spaniards in their civil war were known for using jam jars. Fuel. This can be alcohol, kerosene, napalm, gasoline (petrol), or other compounds that are flammable. Again, in media, we typically see alcohol being used, but there are better choices (more on that below). A fuse, wick, or some other method for ignition. This could be a rag or other absorbent material stuffed into the opening of the casing, but it could also be wind-proof matches, or a mixture of chemicals that, when combined with chemicals inside the casing, will spontaneously ignite. All three of these components can be fairly easily obtained by civilians, hence the popularity of the Molotov.
Common mistakes when mixing a Molotov One of the big challenges with homemade Molotov cocktails is that they cannot be instantly used, or stored long-term; you need to light the fuse right before you’re going to use it. It’s like a grenade, but instead of just pulling a pin, you have to carry a lighter.
In the design most commonly seen in the media, the fuse is a piece of cloth, stuffed into the neck of a bottle. This rag soaks up the flammable liquid.
Note that Molotovs don’t explode on their own! That soaked rag doesn’t carry the fire down into the bottle, but rather ignites the liquid once it splashes, when the bottle breaks.
Because of this, it is important to ensure that the rag is stuffed tightly into the neck of the bottle, so that extra liquid won’t dribble out! Otherwise, when the rag is lit, there’s a risk of spilling flammable liquid on the user.
The wick also should not be very long! Again, remember that the wick is just a way to transfer fire to the target, along with the liquid. You only need a wick that’s an inch or two long.
Another challenge is selecting the right fuel. There are upsides and downsides to each:
Alcohol will burn well, but must be at a high proof or concentration; you can’t use regular 80 proof vodka. You’ll need to use at least 100 proof, ideally something even stronger, like Everclear. Gasoline will burn strongly, but won’t last long, so you get a big fireball but then nothing. The best fuels are mixed with a thickener; the Finns used gasoline mixed with roofing tar to create a form of napalm that lasted longer and stuck to targets. Finally, it’s important to select the right casing. You’re throwing a glass bottle, which needs to be tough enough to stay intact while you’re handling it, but also fragile enough to break when it hits the target.
Unlike a grenade, nothing in the Molotov actually makes it “explode”, aside from the kinetic energy when it hits the target. Some tips:
Don’t use a Molotov against a soft target. If you throw a Molotov at a bush, it won’t break, and you’ll just look silly. Many bottles, such as wine or champagne bottles, are designed to not break when they are dropped. They are generally too thick/sturdy to work for a Molotov. Some guides recommend scoring the bottles with a glass cutter or knife, in order to better ensure that they fully break when they hit. Throw overhand, like chucking a tomahawk or throwing axe. This can be tough, depending on fuse positioning, but gives greater range. The Finns eventually found that, instead of stuffing a rag into the open neck of a bottle, it was easier to strap a weatherproof match to the outside of the bottle, light it, and then throw the sealed bottle with burning match. This also ensures that nothing ignites prematurely or drips out.
If you’re protesting against something, and someone whips out a Molotov, be prepared for the police or forces on the other side to respond in kind. A Molotov is deadly, and it will elicit deadly force to be used by the other side.
Finally, every bit of using a Molotov is dangerous. You’re holding a flame, right next to a bottle of very flammable liquid. Drop it by accident? Fumble the throw? Have someone shoot or smack it out of your hands? There’s a very good chance you’ll set yourself on fire.
Remember, a Molotov does not explode like a bomb; a good cocktail has a tight seal between the internal mixture and the outside flame! A good Molotov has a tightly sealed bottle, but one that is fragile enough to break when it impacts a target.
Despite what we see on television, most alcohols won’t be concentrated or high-proof enough to burn. Actual Molotovs are usually made with gasoline or kerosene.
Historical nitpick just because of history and not for any nefarious reason.
You mention a rag stuffed into the bottle. This is inaccurate to what the Finnish, who invented the device, did.
A rag stuffed into a bottle is easily snuffed out, and the user of the device risks spilling flammable liquid on themselves when throwing the device.
The fins, historically, tied a rag around the neck of a bottle that was sealed. The rag was exposed to air and can burn steadily, and the sealed bottle makes handling much safer. When thrown, the bottle or jar will still break and spread the liquid, and the steadily burning rag will ignite them.
Do with this knowledge what you will.
And always remember that Hollywood has a legal interest in showing you non viable ways of making destructive devices. Always think about the most practical way to do something, regardless of how you’ve seen it in movies.
* furiously takes notes *
Styrofoam is a good thickener, depending on your fuel source.
what might also work is balloons filled with paint, thrown against the windshield of their vehicles. does no permanent damages, but makes it difficult to leave the area hastily.
Yknow I’ve been thinking about riot police with shields njunk. Would be a shame if they got covered and wrapped in a big sticky blob