• Thornburywitch@aussie.zone
    link
    fedilink
    English
    arrow-up
    5
    ·
    4 months ago

    Sounds gorgeous! A jumper of that vintage will NOT be shrinkproofed, so machine washing and drying is out of the question. Hand wash only in lux flakes or a very gentle wool wash (half strength) in lukewarm water. Rinse well twice in lukewarm water. Roll in a towel and press out excess moisture, and dry flat in the shade. Patting it into shape on a dry towel helps it keep its shape while drying. If it warps a bit, pin into place on the towel just like blocking a handknitted piece before assembly.

    A teaspoonful of miscible eucalyptus or lavender oil in the second rinse water will help to keep moths away. Fortunately it may only need washing occasionally - wearing a shirt underneath will do a lot to keep it clean.

    Mending is best done with darning wool if you can find any and if you can’t then embroidery/tapestry wool is probably the next best choice. You might like to reinforce cuffs and collar on the reverse side with a split strand of matching wool a few millimetres in from the edge to help stop fraying. Wool lasts very well when cared for, but can get a bit fragile at the edges when those edges are stretched. If there’s a ribbed edge, then both top and bottom of the ribbed section benefit from that extra strand of wool - does a lot to help it keep its shape while still allowing it to stretch appropriately.

    • Ntcc661@aussie.zone
      link
      fedilink
      arrow-up
      2
      ·
      4 months ago

      This takes me back to my high school years and maintaining my wool jumpers.

      Every tip here is spot on.

    • Seagoon_@aussie.zoneOP
      link
      fedilink
      arrow-up
      2
      ·
      4 months ago

      Yes. Thank you. 😘, some embroidery crewel wool sounds like a good idea.

      The wool and fabric itself is beautiful quality but the garment isn’t fully fashioned, it’s sewn. Still worth mending I think.