There’s no UK standard for three-phase and high amperage sockets or plugs. In fact, UK sockets don’t support 16A three-phase at all, so if you have higher power needs (for example for EV charging) you’re left with having to install a dedicated wall box that uses an entirely different connector than the 3-pin UK plug, BS 1363.
Given this incompatibility, how can you argue that UK sockets are better, for instance, than SN 441011?
To say nothing of how comically giant every appliance plug needs to be, regardless of how low its wattage is?
I did notably just say that the plug is the best in the world for electrical safety. I’ve made no claims of it’s usefulness or convenience outside of that.
I am also unaware of any country on the planet that uses the same plug/connector for general purpose household devices and 3 phase power. The number you provided, SN441011, also just leads to relatively generic household plug that doesn’t seem fit suited for multi phase use either, so not sure what you’re trying to say. I’ve also rarely seen places outside of industrial environments that have multiphase outlets, except in America, which has split phase power, and uses the voltage boost by going phase to phase instead of phase to ground. There’ll you’ll do often find 240V split phase outlets for high power appliances like shop heaters, electric clothes driers or EVSE
To say nothing of how comically giant every appliance plug needs to be, regardless of how low its wattage is?
It’s a minor nuisance yeah sure, but it also has the nice advantage that there’s no need to fully mould plastic around it. UK plugs are pretty much universally openable, meaning you can repair them yourself if a fuse dies, or one of the wires comes lose. It’s also really easy, and literally all you need is a single screw driver, to swap a working plug over onto a cable who’s plug has broken.
But even so, it’s again not a safety issue so not exactly relevant to my poing.
There’s no UK standard for three-phase and high amperage sockets or plugs. In fact, UK sockets don’t support 16A three-phase at all, so if you have higher power needs (for example for EV charging) you’re left with having to install a dedicated wall box that uses an entirely different connector than the 3-pin UK plug, BS 1363.
Given this incompatibility, how can you argue that UK sockets are better, for instance, than SN 441011?
To say nothing of how comically giant every appliance plug needs to be, regardless of how low its wattage is?
I did notably just say that the plug is the best in the world for electrical safety. I’ve made no claims of it’s usefulness or convenience outside of that.
I am also unaware of any country on the planet that uses the same plug/connector for general purpose household devices and 3 phase power. The number you provided, SN441011, also just leads to relatively generic household plug that doesn’t seem fit suited for multi phase use either, so not sure what you’re trying to say. I’ve also rarely seen places outside of industrial environments that have multiphase outlets, except in America, which has split phase power, and uses the voltage boost by going phase to phase instead of phase to ground. There’ll you’ll do often find 240V split phase outlets for high power appliances like shop heaters, electric clothes driers or EVSE
It’s a minor nuisance yeah sure, but it also has the nice advantage that there’s no need to fully mould plastic around it. UK plugs are pretty much universally openable, meaning you can repair them yourself if a fuse dies, or one of the wires comes lose. It’s also really easy, and literally all you need is a single screw driver, to swap a working plug over onto a cable who’s plug has broken.
But even so, it’s again not a safety issue so not exactly relevant to my poing.
Impossible to plug small plug into big power. I see no problems.