the qobuz webapp is hi-res too, I just use it in Firefox and my dac reports the same bit/sample rate that qobuz does. AFAIK there’s no compression there though I haven’t extensively verified that, only that the end result is 24bit/192kHz if that’s what qobuz says is playing.

EDIT: Also, qobuz is nice because there’s very few things you can click on in the web interface which cause the music to stop playing. I really appreciate that feature… looking at you bandcamp…

Yeah, it changes without skipping a beat for me in pipewire, even in things like zoom/teams.

I use a little oneliner with tofi (rofi/wofi would also work) to select the current output and avoid pavucontrol. It’s mapped to a sway binding but would probably work in any wm/de:

pactl set-default-sink $(pactl list short sinks |awk '{print $2}' |tofi $tofi_args)

I’m using pipewire so the functionality of pactl is actually provided through pipewire-pulse I think

Interesting, it is working for me in wayland and the drop down menus are fine but I’m using sway which is a totally different wayland implementation than what KDE is doing. I’m glad you found a workaround.

Unfortunately I don’t know what is causing the exact issue you are having, however here are a few things I found when doing this myself that are “gotchas” (not immediately obvious).

1. This is the reason your fonts are all Times New Roman. Go to that key using protontricks regedit and delete all the font replacements.

2. Anything you put in $HOME/.steam/root/steamapps/common/assettocorsa stays there, even if you uninstall the game. If you want to “start over” you have to uninstall the game and then delete the whole assettocorsa directory there, and the wine prefix in $HOME/.steam/root/steamapps/compatdata/244210

3. AC and content manager work without .net changes in the latest GE but you do need corefonts which you can install with protontricks. If you want to be extra sure you have the right .net you can install dotnet472 but I don’t believe this is necessary anymore as it will be installed automatically or is already installed. You may get a wine .net error the first time you launch the game but it’s only the first time.

4. If you choose to use CSP you have to unzip the archive you get from either Patreon or acstuff.ru and manually copy the dwrite.dll file into $HOME/.steam/root/steamapps/common/assettocorsa on EVERY upgrade. The zip installer built into CM doesn’t do this correctly on Linux. It will cause rain not to work if you choose to use the Patreon version if you don’t do this manual step.

I think you should start over and make sure the assettocorsa directory is clean before re-installing the game. It could be missing fonts, but it’s hard to say. You can back it up somewhere if you have data in there you need.

What version of kde? I haven’t tried it, or read about it beyond the changelog, however the latest beta release says that it supports RDP to connect to plasma desktops which is quite an interesting development if it works the way it sounds like it does:

Remote Desktop system integration to allow RDP clients to connect to Plasma desktops, plus a new page in System Settings for configuring this

For the “from anywhere” component you could use a vpn, but if you’re looking for a simple solution with zero configuration than nomachine or rustdesk seem more appropriate. Just thought the RDP support was worth sharing.

So, I’m not sure if the process has changed in the last decade or so but in a long-ago computer forensics class step 0, before all else, was to never operate data recovery on the original disk. Create a block level image of the entire device, then work on that.

My go to steps for recovery have been the following in the years since:

1. create an image of the entire disk (not a partition) using ddrescue ddrescue -d /dev/sdX <path_to_image>.img
2. Run test disk on it selecting the partitions as necessary testdisk <path_to_image>.img

If the disk has a complicated partition layout, or more effort is required to find the correct partition you can also mount parts of the disk.

1. create an image of the entire disk (not a partition) using ddrescue

   ddrescue -d /dev/sdX <path_to_image>.img

2. Mount the image as a loopback device with the appropriate offset

   losetup --offset <some_offset_like_8192> --show -v -r -f -P <path_to_image>.img this will mount individual partitions:

   loop58        7:58   0 465.8G  1 loop
   ├─loop58p1  259:7    0   1.5G  1 part
   ├─loop58p2  259:8    0 450.6G  1 part
   └─loop58p3  259:9    0  13.7G  1 part
   

3. Then operate testdisk on whatever partition you want.

All that said there are a lot of variables here and things don’t always work perfectly. I hope you do find a way to recover them.

Nextcloud AIO is not the only way to run Nextcloud in docker. For example you can use the Nextcloud docker repository and docker-compose for which there are many examples. I’ve been running Nextcloud this way for many years now without any un-recoverable issues, and no issues at all that weren’t caused by me. Upgrading is also very easy since you simply increment the version in docker-compose.yml and restart the service.

That said the NixOS suggestion from @StrawberryPigtails@lemmy.sdf.org looks really neat and I may try that out soon my self since I’ve never played with NixOS before and it seems like a good excuse to do so.

Sway for a little over a year now (on an AMD gpu). I switched for mixed refresh rate support and VRR. VRR requires a workaround in sway but works better in others, like hyprland, however I like sway’s tiling better so I stuck with it. Also the absence of tearing in anything, ever, is worth it to me. I have two vertical displays and it was really hit or miss on X11. Sometimes GPU acceleration would just decide not to work in browsers and I’d have to restart them because smooth scrolling would turn into a stop-motion film. That’s never happened since switching to sway.

EDIT: I used i3 before

I use sway and run zoom in my browser (because zoom is shady and I don’t trust them). Screen sharing works fine in the browser. The application never worked very well to being with anyway for me, even on X11.

I also use https://git.dec05eba.com/gpu-screen-recorder/about/ for individual output screen recording such as gaming which works amazingly well. You can not select a section of a single output though, only the whole output. That’s a deal breaker for some, and a non-issue for others, just depends on what you need.

I think this one https://github.com/nextcloud/desktop/issues/5369 is probably the more relevant, and also open, issue. However even in that issue people claim you can choose not to. The argument is only that it suggests restarting explorer and also rebooting and that this is annoying. So you never get a prompt, it just dies?

I agree though that the amount of time where it was force rebooting is pretty bad, and it looks like the rollout of the patch was mishandled. I also should probably admit that I’ve never touched the windows client, my environment is entirely Linux and Android. The Linux client even with file manager integration doesn’t require restarts of anything.

I mentioned the client in there (4th paragraph), but mine was more of a general rant on the overall low effort that seems to have been put in to figuring out what the actual problem was. And that it is relatively common among people in the self hosting community to assume that Nextcloud is a lot simpler than it is. It’s a huge cloud suite consisting of many applications, clients, plugins, proxies, caching, database, etc. You need to have a pretty good understanding of how it all works, and how to investigate a problem, and ideally you should be testing before upgrades. Large organizations often even test endpoint applications like the desktop client and push out only tested versions to users via policy or some kind of endpoint management.

I can’t really draw many conclusions from the very little information provided in this post, but I suspect OPs windows machine is not in an entirely stable state, which is what is causing some of these update issues.

And, I put some of the blame for Nextcloud under-representing it’s complexity on Nextcloud’s marketing and AIO. You absolutely can install it without understanding anything, and that’s a little dangerous in my opinion because it is actually quite complex and you will probably end up breaking it at some point and need to dig in to fix it.

Ok, I’m prepared to be downvoted today so here goes.

Nextcloud is an enterprise cloud suite. The one you run in docker on your rpi (or whatever) is the same one that is run at a company, albeit with more high availability and redundancy, but the same application, proxies, caching, db, etc. Nothing is stopping you from running the stable channel and testing your upgrades, or even rolling out specific stable client versions to your devices.

Said companies often have teams (more than one person) to run it, stage upgrades, automated testing, automated backups, monitoring, etc. They go to work and do just that, maybe not every day but at least a couple times a week their focus is Nextcloud and only Nextcloud.

What many people in the self hosting community do is spin up docker, without ever having touched docker before, and try to run Nextcloud, forget that it exists, and then upgrade it a year later across multiple versions without maintaining the database. Then they obsess about how fast an app loads by refreshing it a whole bunch, and then complain on internet forums that it sucks. This, like many posts, doesn’t have a specific problem for us to help with, no logs or stack traces have been posted, and the subject of the complaint shows just how terrible your understanding of application security is.

So, while there is legitimate criticism of some of Nextcloud’s design choices, this isn’t it. And at the risk of sounding a little gatekeepy, if you post “nextcloud updates break everything” with no context you probably should spend some time gaining a better understanding of how internet facing services work and make an attempt to fix the problem (probably misconfiguration, and in this desktop client case probably a heap of un-updated local software installed alongside the client), which I’m sure people would find if they did the bare minimum of reading a few log files or any of the other things that come with being an application admin.

“An attacker would need to be able to coerce a system into booting from HTTP if it’s not already doing so, and either be in a position to run the HTTP server in question or MITM traffic to it,” - Matthew Garrett

Summary left out a quite important bit.

Mosh hasn’t had a release in quite a while (Oct 2022). While that’s not that old, and there does appear to be somewhat active development, it’s a little slow moving for something that might be open to the internet directly. I used to use it but ssh with tmux is mostly fine and makes me feel a little safer because of their wider use.

AFAIK openSCAD is a code driven mesh format. So if you want to import openSCAD models into any other CAD software you have to convert the mesh to STEP or some other actual 3d object format during which there can be lots of error if the model is complex. I don’t have a lot of experience doing this but I just tried a model I had lying around from the dactyl keyboard project and converting it resulted in a lot of really broken surfaces.

This is a cool alternative that makes 3d objects instead of meshes (at least it says it does). https://zalo.github.io/CascadeStudio/ . Also open source but web based.

EDIT: I should mention that CascadeStudio seems to be abandoned, just a cool concept of a different way of doing code driven CAD.

I use FreeCAD and Assembly3 for everything and have for many years now. I sometimes use realthunder’s fork of FreeCAD but right now it’s quite a bit behind upstream and there are some cool new features in sketcher so I use upstream for those.

Some people get confused about workflow in FreeCAD because there are so many options and every youtube video has different opinions or tries to feature a particular workbench like curves or something. My opinion… Pretty much your workflow starting out should be to ignore everything else and use part design and sketches, it’s the simplest way:

0. enable autosave with a short interval, like 2min

1. Switch to part design workbench

2. create body

3. create sketches as the base of the features of your part attached to the xy, xz, yz planes, offset them to create a “wire frame” that resembles your project

   a. Your sketches should be fully constrained

   b. Your sketches should have as little geometry in them as possible, if you need more complex stuff make more sketches

   c. Your sketches should have closed wires, you can’t pad something that doesn’t create a face.

4. use pad, pocket, revolution, loft, and hole operations on those sketches to form a 3d solid

5. if you need to create additional sketches which import geometry from the previous operations (using the external geometry tool), import SKETCH geometry from the previous ops, not edges of solids, whenever possible. Hide your solid, unhide your sketch, select that with the external geometry tool.

   a. Use sketch on face sparingly.

6. Do fillets and chamfers last, if you need to change something, delete them and recreate them once you’ve made your changes.

To make multiple parts make multiple bodies with the same workflow as above.

Once you get pretty good at making static parts with constrained geometry, holes, threads (with the hole function), etc, which you can do with only the stuff above, then you can branch out into other workbenches like assemblies or curves, but all of those things build on the concepts above, so it’s easy to get overwhelmed if you try to do it all right from the start. Learning how to recover from a mistake is just part of CAD in general, though I admit that it’s a bit more effort to find what’s wrong in FC vs commercial platforms, but we aren’t here, on lemmy, in a linux community, to use commercial platforms.

AFAIK that’s pretty much the same workflow as F360 uses for single-solid parts though things have different names. pad=extrude for example.

It’s obviously far from perfect but in my opinion it’s the best solution that runs natively on Linux and is actually open source. Also assembly3 uses solvespace as it’s backend solver so if you make assemblies using that you are kindof using solvespace too.

Also, I hear/read a lot of complaining about instability but I’ve honestly never had a crash that wasn’t on an experimental branch like RT or the edge release of upstream. However step 0 above should help if you’re worried about that.

this one? =]

I do this too, but additionally group these outputs strategically on my 4 displays. I never thought of it like a desk with papers on it but that’s very much what it is. And also how I organize papers on the few occasions that I do that.

Dark mode back in the day (XP/Vista era). I wanted to theme everything and have cool UI/visual features in a non-shady download-this-third-party-totally-safe-theme-engine-wink-wink way.