Yes as far as I’ve found so far, the features track quite well, and I’m really aiming to get proficient with the standard interface. I’ve found a few minor differences, but I tried stock Mint (which is Ubuntu 20.04 based) for a while, and I didn’t want to go backwards from Trixie (the current Stable Debian version) so I opted for LMDE which is based on Trixie. I use Debian Stable because of the “2-year cycle” (that’s why it’s called stable); Because stock Mint tracks the latest LTS release of Ubuntu, it’s actually a fair bit more out of date than Debian at this stage, and the next Mint version, based on the new LTE Ubuntu, isn’t slated to come out until December.

So far it’s not been too bad for a hybrid system - I have had a couple of issues, but this is most likely attributable to being a hybrid. I’ve found that I like Cinnamon, which stock Debian does not (as far as I know) support yet - I have used MATE for about 15 years because I don’t get on with Gnome 3 or KDE. You get all the nice things about Mint that I found impressive when I tested it - the printer and scanner support is very good, and the configuration utilities are quite reminiscent of Windows ones (good for new users, but I personally don’t care). Still not sure if I’m going to stick with it long-term, but happy with it for now - I largely stopped distro-hopping when I switched to MATE.

I know right. I had a right game reinstalling Win 10 on a lenovo netbook - I had to put a supported, unmanaged version on it for installing lenovo dock firmware updates. For some reason, the default graphics mode was totally corrupted - almost unreadable, and rotated 90 degrees. Once the installer had finished, I had to manually install the right driver for the graphics hardware, and that fixed it. Took hours - total amateurs. For shits and giggles, after I’d finished with with the firmware updates, I installed Mint on it - and it was flawless, and done in half an hour. This is the way to do it!

Favorite: Debian Stable (For my uses, it was the least trouble)

First: Slackware (1995, installed from floppy disks, also a short stretch in 2009)

Current: Linux Mint Debian Edition (LMDE) (Using because I need to support users on stock Mint)

Distro you liked the least: Novell SuSE (Used in a corporate setting)

Distro you want to use in the future: Unknown

Distro you used for the longest time: Debian Stable (15 years)

Distro everyone likes but I don’t: Ubuntu

Honorable mention: DietPi (RaspberryPi and SBC focused OS)

Over time, I’ve used quite a lot of different distros: Red Hat, Red Hat Enterprise, Scientific, CENTOS, Fedora, Mandrake, Damn Small, Puppy, CrashBang, Raspbian, Bazzite, to name just the ones I can remember off the top of my head now.

After a quick listen and skip, can confirm, that would do the job :-)

Interestingly, the music I prefer to listen to is more rocky - Punk/Grunge/Ska/Folk/Dub.

I acquired my love of psytrance in the early noughties when I used to do henna art at festivals in the UK. We got friendly with a couple who ran a psytrance CD stall, and were very often pitched right next door, so I spent many a weekend doing henna art with their music blasting out of their PA as a backing track. One CD that was popular at the time was Virtual Memory by Alchemy, but I seldom knew who I was listening to - it never seemed to matter. Worked well for getting into “the zone” though, and it’s not distracting because I don’t find myself trying to listen to the (usually non-existent) lyrics.

Psytrance or Dubstep. Something without much (or any) lyrics but with a strong bassline, maybe a bit glitchy.

Not used graylog, but if that’s what it’s for, it should be a lot better than manually checking logs.

Interested to know if this is for international travel, or just within your country’s borders? I would be concerned with this going through airport security, whether in carry-on or checked luggage - x-rays can damage electronics, and the potentially suspicious appearance of electronics to the non-technical could cause problems.

Monitor your logs with a network monitoring tool like Nagios, Icinga, etc. You can set filters for alerts you are genuinely interested in, and email the alerts to your ticketing system or sysads.

Everyone who uses O365 is pushed to use the web versions by the O365 ecosystem. When you click on Word/Excel/Outlook/whatever from your menu, it opens the web version; to use the locally installed app, you have to go to File/Open in Desktop or similar. The Open and Save dialogs default to using OneDrive - saving to local filesystem requires extra steps. The locally installed ones are becoming increasingly hard to use, by design, and the new features seem to be going into the web versions first and the local versions “eventually”. For example, the new excel “matrix” functions did not work in local excel the last time I tried to use them, though they might now, but there were a few features (special formatting I think) that only worked on the local version. Templates for word do not work on the web version.

Yeah. Right.

Interestingly, the web 365 apps seem to work on Linux Mint, but I’ve not used them extensively, or on another distro. I did a migration from Win10 to LM last autumn, and I was genuinely shocked to find that web Outlook and OneDrive work on Firefox on LM. Confirmed that web Excel and Word worked enough to allow display and editing of documents - not an extensive test, but definitely worth a look. Obviously, there are still differences between the web and desktop versions, but it might even be possible to run them under Wine, but I have not tried that, and woudn’t expect it to go too well tbh.

Can confirm. I used Linux and Unix almost exclusively for about 20 years, and when I more recently had to use Windoze again for work, this is pretty much what happened.

Could be QOS or packet shaping going on at your ISP, or just throttling or congestion. Speed tests only really test for typical traffic patterns, so will give you a warped view: it certainly disagrees with your observed measurements. There are lots of factors that can affect how quickly traffic passes between two hosts on the internet, but domestic broadband is generally the worst of all worlds - you usually share bandwidth with other subscribers, and although the throughput can be quite good, the latency and error rate can be quite bad, and you can get fragmentation as frame sizes can differ between network segments, causing buffering especially when congestion is occurring. Your ISP might also have deprioritised your type of traffic, or they might be dropping packets, which causes retries, and thus slows your connection down.

Had to do some work with SuSE post Novell acquisition for a customer. IIRC the package manager is a bit odd, but I haven’t looked at it in what nearly 15 years, so I can’t really remember much about it. What I CAN remember involved running packet traces using Wireshark - it was mostly network problems, I think, so nothing to do with SuSE. It was certainly very popular in Europe, though I have no idea what they’re doing these days!

You never know … maybe THIS year!

The way windoze 11 is going - people really hating it - you never know, but I’m not holding my breath. Linux is still very niche, and people are wary of “strange” “new” things, especially FREE ones - where’s the catch? I’ve seen it surge and blossom over the years, but it’s still got a really tiny install base (as long as you don’t count Android and embedded tech, where the OS and kernel are largely irrelevant to the user). But I don’t see people moving over to Linux in droves any time soon, really: I’ve seen too much.

For context, I’ve been using it since [dredges up old memories] slackware was new, so about 1994, when a work colleague and I installed it (off about 20 floppies) onto an old 386sx PC with probably 4MB of RAM. Been using it ever since - and from Red Hat 4 onwards (about 1999) it’s been my only OS on my own computers. I’ve always preferred it, and I’ve seen it grow in so many ways - I’d still use it if it was illegal. I haven’t tried EVERY distro, but I have tried most. These days I mostly stick with Debian or Debian-based distro’s (I’m currently on Mint LMDE).

He’s bang on. LLMs have no understanding of anything: they are literally just statistical models.

Don’t have any experience with this particular model, but I have found that with most printers on Mint you don’t have to “do” anything at all - if it’s on the network or plugged into the USB, the system will find it and install a driver automatically. I’ve used MANY printers with Linux over the years, and some were a right PITA to set up, but so far all the printers I’ve tried with mint have “just worked”. The only problem I’ve had recently was that when I updated to the Debian Trixie based LMDE 7, a bug in CUPS misconfigures EPSON ET2860 when automatically discovered, but it still works on stock Mint 22.3 without manual intervention. The fix is to manually add it, rather than accepting the auto discovered one, so it’s a problem with the discovery function, not drivers, and I suspect it’s due to some kind of quirk with this printer’s firmware that defines how it interacts to discovery queries on the local LAN.

Not only can you take loans against your shares, but you can pay the interest on those loans with dividends from the shares, and because they’re a loans, the cash-in-hand is not taxable, so you pay NO TAX on it. You have no “income” on paper, but you can pay people and companies with shares instead of money, shares that you can literally conjure into existence by typing numbers into a spreadsheet. Those money and shares are really useful for greasing the palms of politicians, government officials, and hangers-on so that you can get your way. You can even use this money and influence to cause riots and stoke division in society.

Yeah it was wild, but I suspect few orgs do things that way any more.