This would be huge, one of the biggest draws to Plex for me is being able to use a single account to watch content across all my friends servers from any Plex UI (be it the hosted one at app.plex.tv or the copy hosted with each Plex server)

Sure, most of them are posted here: https://www.printables.com/@StephenSmith

I almost exclusively print functional things so here’s my list of things I’ve designed or printed:

• Tubular key to bypass paying for laundry
• Furniture leg extensions on almost all my furniture to give minimum 4" clearance for the robovac
• Custom mounting bracket / spacer for mounting road sign to the wall with command strips
• Tapestry mounting shim to clamp tapestry in binder clips to hang on the wall without ripping the tapestry
• Rubber band powered sandal holders that stick to the wall and clamp onto sandals which can be used without using your hands / while holding something (I needed to keep my basement sandals from being eaten by my old robovac and I needed to be able to put them on and put them back without needing to put down anything heavy I’m taking to/from the basement, and the space required it to be flat against the wall)
• Replacement shelf pegs for bathroom shelves which are normally only sold in 20 packs for >5$ when I only needed 1, the print cost like 1c instead
• Replacement D-slotted electrical box key since the one that came with the box broke
• Backyard lamp holder that attaches to the fence pole and provides a loop to hang a lamp
• Replacement side panel clip for my PC case which came with 1 broken - manufacturer doesn’t sell replacements
• Custom piece for 2 sectional couch legs to slot into which keeps the 2 halves of my couch from sliding apart causing someone to fall in between onto the floor

Some of this could have been bought online but having a 3D printer really reveals how overpriced plastic stuff is. I rarely print something that costs me more than a few dollars in filament - and that’s if it’s a very large object, it’s easily less than the shipping cost of an equivalent item alone, and small things can often only be found in large packs online while usually costing only a couple cents to print. And plenty of the stuff I print benefits from being able to be made custom and to the exact dimensions I need, for example the furniture leg extensions I made fit perfectly on the furniture legs and raise them up exactly as high as they need to be for my robovac to go under, not a centimeter more. A whiteboard marker caddy I made holds the exact number of markers I have / want to have and attaches under a light switch wall plate which I designed in order to avoid needing to attach it with command strips or screws (it gets clamped between the wall plate and the wall by the existing light switch screws). The first item I listed, the tubular key, was printed with the exact bitting needed for the lock (layer height of 0.05mm is enough vertical resolution for the key to work).

Was also gonna say this since expensive gadgets weren’t excluded. I played a bunch of VR minigolf over pandemic to socialize with my irl friends who I couldn’t hang out with and these days VR has been the center of more than half of the social gatherings at my place where I demo games and we pass the headset around for everyone to try different stuff. Seeing new people try VR for the first time never gets old.

the wine prefix is being updated, please wait…

After watching a Jackson galaxy video on how to stop your cat from waking you up early, I followed the advice of never feeding immediately after getting up, and instead doing a certain activity first, like making coffee. After a month of taking a shower before feeding, my cat no longer makes any noise in the morning and only starts getting noisy when I step out of the shower. So thats a good tip for those who can’t free feed. I also started collecting every toy and putting them in a secure box before bed since she has a tendency to chase toys around in the middle of the night and yelp with one in her mouth.

My roborock has been revolutionary for my apartments cleanliness. I’ve had it about 1.5 years and I’ve only emptied the dock’s bag twice (I live in a small apartment). I have the water change kit so it auto refills the docks clean water tank from the laundry hookup and auto empties dirty mop water down the laundry room’s drain. I only have to clean the sensors and rinse the drain screen every 2-3 weeks but otherwise it’s on autopilot on a schedule and my floors are spotless and free of dust and cat fur.

You can use bazarr to batch generate whisper subtitles for your Plex/jellyfin/kodi library: https://wiki.bazarr.media/Additional-Configuration/Whisper-Provider/

It doesn’t need to be realtime since you can pre generate an srt with time codes beforehand using something like bazarr. Whisper also runs faster than realtime in most model sizes, up to 32x realtime so it can really be worth it to add auto subtitles to media in your collection that’s missing subtitles as a one time job.

I wish that would happen, or maybe if someone forked their client and hooked it up to connect to matrix home servers. The client looks great.

The ribs are the simplest, at its most basic all you have to do is remove the membrane on the back and then curl it up on a trivet over a cup of water, pressure cook high for 25 minutes and let sit under pressure for 10-25 more minutes after it’s done (depending on how fall-off-the-bone you want, I usually like 25mins), glaze with bbq sauce and broil in the oven until it gets a bit of char.

You can also salt & pepper it before putting it in, use apple cider vinegar instead of water, and/or add a few drops of liquid smoke in the instant pot. But it turns out great even when I forget to do those things so really all you need is ribs and sauce.

I got the recipe from here: https://www.pressurecookrecipes.com/easy-bbq-instant-pot-ribs/

Here’s my favorite recipes, I use it every week:

Ribs - easy to get super consistent results, pressure cooking helps keep moisture in. (https://www.pressurecookrecipes.com/easy-bbq-instant-pot-ribs/)

Clam chowder - creamy New England style, I add extra seasonings to amp it up. The clams I get in cans and bottled clam juice so the only non-shelf-stable ingredients are onions, carrots, celery, and garlic (https://recipes.instantpot.com/recipe/new-england-clam-chowder-2/) My additions: To make it more hearty and thick I do 3 cans of clams instead of 2, 4ish strips of bacon bits, an extra stalk or 2 of celery, between 1.5 and 2 lbs of potatoes instead of 1, and parsley and paprika in the same amounts as the thyme and oregano.

Spaghetti carbonara - my new cook book addition. grating the cheese adds more work, but overall still very simple as far as instant pot recipes go - saute the pancetta and reserve, saute onion and garlic, pressure cook pasta in broth, stir in butter, cream, cheese, egg, and pancetta when done (https://pressureluckcooking.com/instant-pot-spaghetti-carbonara/)

Corn chowder - really similar to the clam chowder but good for if you’re not feeling seafood, like most of the recipes I favorite, the steps mostly amount to dumping all the ingredients in, pressure cooking, and stirring in something extra at the end (in this case cornstarch and half&half to thicken) (https://www.tasteofhome.com/recipes/instant-pot-corn-chowder/)

I also use the instant pot some for other recipes but I lean heavily towards 1 pot meals and stuff where I can get away with putting 90% of the ingredients in for the pressure cooking step, that does mean a lot of soups but I’m working on adding more pasta dishes to my repertoire.

(Edited to add recipe links)

Imo the best pushback is to leave and make twitter irrelevant

I pay for refrigeration destruction, but that’s about it. It’s strongly verifiable, additional, and as permanent as can be. It’s through wren, which seems to be the most strict about credit quality since they removed all the other projects like cooking stoves and tree planting a while back leaving only refrigeration destruction and biochar, which also seems like a quality credit albeit many times more expensive than refrigeration destruction.

That said I don’t treat carbon credits as offsets, just an additional charity that I do on top of doing my best to be sustainable, reducing, reusing / repairing, and responsibly disposing of things. At the end of the day you can only do so much individually so the only way to do more is to put some of your extra money somewhere that might do a little extra good.

A dht crawler is inherently an intensive service to run, magnetico used sqlite and would take 10 minutes just to load the splash page that includes the total count of discovered torrents.

Roborock or robovac, would be nice to keep up to date on new products and share troubleshooting info with other robovac owners / shoppers, but building that community here isn’t a task I’m up to.

Lately it’s been Sailorsaturdays by Kokonoko https://youtu.be/YfnUim6no3A

I can’t help with the 2 options you presented, but if you’re interested in an sfp+ router, I’ve used the DEC2750/DEC750 from OPNsense as a directly fiber connected router for Comcast Gigabit Pro 2Gig fiber for several years. It’s super capable, you’ll have an enormous state table to accommodate tons of P2P connections for torrenting, and you’ll be able to enable loads of plugins, VPN connections, IDS, etc without the CPU breaking a sweat.

I just run them side by side on the same nuc. All my friends still use Plex though I think because the apps look nicer. I wish jellyfin had federated features so that you could choose to use a single account across many friends instances. I still use Plex because I don’t want to deal with syncing watched status between instances.

But only if you can reverse time for a bit