Just ordered an X7 and a PNY SD Card. I’ll post here as well when it comes in if they are working.

I almost ordered the SanDisk Ultra pictured, going to kick myself if the PNY doesn’t work and I have to order that one anyway :D

I have an older nvidia card (1070) and had more of an issue than that getting the correct version of the driver installed for my card, and getting it to use the correct driver instead of the open source one that didn’t work well. It’s also possible I was doing something wrong. But yeah, it’s definitely doable, and it’s not too bad, but it’s fiddly compared to the ubuntu driver gui or something like bazzite that works out of the box with it.

Yeah, I probably wouldn’t buy a new laptop for a server, but it’s a great way to re-use what would otherwise be e-waste. I have a 20 year old laptop running as a server, currently just for FoundryVTT, but it works great. 4GB of DDR2 ram, Intel celeron dual core cpu. I stuck a new ssd in it (old hdd died) and it works great, as long as I don’t run any graphical interfaces while I have the server running. One ram stick was bad, but DDR2 cost me about $11. Total hardware cost was around $50 USD.

Thinking about just removing the lid entirely, since I don’t use it graphically (I can hook up a monitor if absolutely needed).

I have used gnome, plasma, and xfce and they are all fine. I prefer KDE personally but they’re all going to do what you need to do. It’s all down to personal aesthetic preference, and picking one won’t hinder you in any real way. KDE to me just looks super nice out of the box for my taste, and I like the customization.

I love Debian. Been using it on my laptop for over a year. Some specific drivers are a little fiddly if you have nvidia graphics but it’s not too bad, lots of good info on the debian wiki.

I miss the old tts voices and now everything is ai generated garbage :( Bring back the robot voices!

That’s why we use JavaScript on the front end, JavaScript on the back end, and you can streamline it even more by using JavaScript for the db layer too. After all, if you have too much data to be reasonably parsed in a single .json file, you are probably just architecting wrong.

Yeah absolutely. It’s a very different experience. I was just pointing out that they are other different reasons to prefer not to do residential service calls that don’t apply to retail. There are a lot of extra steps for retail but it’s all an established process. The guys I talk to that have done service call work all have absolutely insane stories.

I’ve talked with people in HVAC who have said the same. It’s much easier to provide a service to a business than random individuals.

However, this is different, as this is just a retail product. Micron doesn’t have to deal with the person who doesn’t pay after the job is done, or doesn’t lock their dog up because “he doesn’t bite, it will be fine” and it turns out to be an aggressive monster. This is just assembly line production that they already are set up to do.

I get that they have a limited number of inputs and they are just choosing to make as much money as possible. It sucks to see that go, though. Crucial has always been my go-to for RAM.

And then power toys shortcuts conflict with the standard shortcuts and requires a ton of fiddling and customizing configs. You know, the thing windows users always say is a reason they don’t want to use linux.

That should also come up in a reviews also. Not trying to imply one guy should get fired as a scapegoat, just talking from experience how much it sucks to know your code caused major issues.

So the actual outage comes down to pre-allocating memory, but not actually having error handling to gracefully fail if that limit is or will be exceeded… Bad day for whoever shows up on the git blame for that function

It does look very chonky, and not very aesthetically pleasing.

However, as a heavy user of the steam deck over the past year, I am super excited. The track pads and the extra inputs on the steam deck give so much flexibility to play games that otherwise wouldn’t work well with controller at all. I’m just hoping it feels better (or at least not worse) than the steam deck in terms of ergonomics. I plan on getting one for my desktop PC.

I’ve seen some people say they got fusion 360 working on linux with bottles, but I didn’t have any luck with it. I use OpenSCAD and FreeCAD for making models to print, but if you need Fusion360 specifically for work (or specific Adobe products) then you are kind of stuck unless your company is ok with a change. You won’t be able to view or edit other people’s Fusion360 files without that specific application. You can always run Windows in a VM on linux and install only the applications you need it for there. If you have a good enough PC that is viable, but isn’t a great experience on a lower end system.

Do you use vim motions in your JetBrains IDE? We use Webstorm at work and I installed the vim motions plugin because I want to get more fluent with using Vim but I haven’t really given it a fair shot yet.

My 8 and 9 year old kids use xubuntu on a 2013 macbook air. They use it for writing stories, making a lot of pixel art with Piko Pixel, and some code block style programming with Lego Spike. They are learning about multi-user systems, file management, etc. I’m keeping an eye out for a cheap pc that can run Minecraft (lots of those right now since people are just trashing old win 10 machines) because the older kid wants to learn how to make Minecraft mods.

“Install this bloated spyware in exchange for a little bit of convenience” is like 80% of modern tech and I don’t know how people are just ok with that

I installed Bazzite and it felt so much like installing Windows for me (huge install image, slow process, lots of loading wheels and user friendly “pretty” screens to get set up). It didn’t feel great, but I figured I’d give it a fair chance and learn how to use a different setup than I’m used to.

I still haven’t had a chance to actually do much with it (only a couple of hours between work and other stuff) but I am really interested in the concept. After reading up more and watching some videos I now understand why the install process is so big and the reasoning behind it. This type of distro really does seem like a great option for regular users.

Only issue I’ve had so far is connecting to my RaspberryPi to control my 3d printer using the .local hostname, since flatpak apparently has a bug with mDNS. IP works fine, and I did rps-ostree install a browser, which was kind of a pain, and probably not the correct way to address the issue, but that was within the first hour or so of using it and I haven’t figured out the best way to do that type of thing yet. Really looking forward to learning more about the setup and how to customize stuff on top of it. Distrobox seems extremely powerful and sounds like it will give me everything I want.

Still have vanilla Debian on my laptop, which I absolutely love, but using it on my desktop PC was kind of a pain due to some proprietary drivers required there (nvidia).

pretty

This is the real pro tip. “Debian packages are behind” but you can just clone the repo or download the .deb and get the latest version of the tool you want. I know there can be dependency issues but I haven’t run into any with the stuff I use.