Been planning to migrate from my Supermicro monolith server for a while and finally finished the migration. Red thing is opnsense on an APU engine, Lenovos run a proxmox cluster, below is a mini PC with attached JBOD running TrueNAS.
Next step is to get another shelf for my Raspi and openDTU.
I also have an APU. What model do you have and what is your maximum routing speed?
It’s the 2C4. I’m not using it for actual routing but for subnetting and firewall basically and I get a little over 500 Mbit/s through it.
Okay. Thank you!
500Mbit/s with firewall rules is decent!
I only know of “routing” at layer 3 (even between just two networks) and “switching” at layer 2. What workload is subnetting?